Stepless® Ear Clamp

When ordering Stepless® ear clamps, select the nominal size nearest to, but always larger than, the outside diameter of the material to be clamped. The outside diameter should be determined with connection fully assembled.

for silicon, vinyl, polyurethane or other high-tech materials

for low durometer and/or thin-walled hose/tubing

once installed and clamped, any tampering is easily visible

no steps or gaps inside the clamp

A built-in spring action permits the clamp to breathe without loosening.

Smooth inner band prevents damage to the hose while the tongue-in-groove design provides a 360° seal.

Stepless® ear clamps hold against pressure and vibration or material shrinkage due to temperature changes or aging.

Install clamps using 1098 or 1099 clamp tools

Clamps are not reusable; they should not be pried open, doing so renders the clamps nonfunctional.

When installing Stepless® ear type clamps over an object, please note that each ear must be crimped closed to obtain a proper seal.