Male SAE Inverted Flare Swivel x Push-on Hose Barb

Male SAE Inverted Flare Swivel x Push-on Hose Barb

×
Part Number 2900508C
Material Brass
Component Material Yellow Plastic Cap
Male Thread UNF
Male Thread Size 1/2"-20
Tube OD 5/16"
Hose ID 5/16"
Hex 1/2"
Length 1.58"
Pressure Rating 350 PSI
Temperature Range -40 to +150°F
Optional Pkg/Box Qty 50
Weight Lb 0.0410

Specifications

  • Number of Barbs: 2
  • Barb Length:.77"

Installation

  • Assembly Instructions:
  • 1. Trim hose end with smooth square cut.
  • 2. Lubricate either push-on fitting, hose or both.
  • 3. Insert push-on fitting into hose until first barb is in hose.
  • 4. Place end of fitting against a flat object (bench, wall, etc.) and grip the hose one inch from end. Push with a steady force until end of hose is covered by yellow plastic cap.

Instructions

  • Disassembly instructions:
  • 1. Leaving push-on fitting in place, make a 1" cut in the hose along the barbed end of the fitting. Note: Be careful not to nick barbs when cutting the hose.
  • 2. With firm grip on hose, give a sharp downward pull to release the fitting from the hose.

Note

  • No hose clamps or ferrules are needed

Safety notes

  • Dixon push-on fittings are intended for use with Lok-On (push-on style) hose only.
  • Caution: Push-on fittings will properly grip push-on hose only when pushed all the way in, with the cut end of the hose completely concealed by the plastic cap.
  • WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

×

Brochure/Literature

Catalog Page

Interactive Resources

×

Related Products

×
×
×
×
×

Stock Availability