Dual-Lock™ P-Series Thor Interchange Hose Barb Coupler with Knurled Flanged Sleeve

Dual-Lock™ P-Series Thor Interchange Hose Barb Coupler with Knurled Flanged Sleeve

  • dual lock p series thor interchange hose barb coupler
  • dual lock p series thor interchange hose barb coupler
×
Part Number 4PS6-FS
Material Steel
Hose ID 3/4"
Body Size 1/2"
Maximum Operating Pressure 300 PSI (20 bar)
Temperature Range -40°F to +250°F (-40°C to +121°C)
Weight Lb 0.6500

Construction

  • Machined components are manufactured using solid bar stock.
  • Nitrile (Buna-N) seals standard
  • Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2-Piece Sleeve has a phosphor bronze spring.
  • Steel componentry is plated using ROHS Compliant Trivalent Chrome.

Compatibility & Interchange Data

  • Thor Finger-Lock Interchange
  • Interchanges with National A type, Campbell Double-Lock and Thor PHC series couplings

Safety notes

  • It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.
  • WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

×
×

Related Products

×
×
×
×
×

Stock Availability