Boss-Lock™ Cam & Groove Swaged Type E Adapter with Ferrule

Boss-Lock™ Cam & Groove Swaged Type E Adapter with Ferrule

×
Part Number RE100-1770
Material 316 Stainless Steel
Size 1" (25mm)
Hose OD From 1-36/64" (39.69mm)
Hose OD To 1-44/64" (42.86mm)
Maximum Operating Pressure 250 PSI
Optional Pkg/Box Qty 10
Weight Lb 0.9550

Applications

  • Developed specifically for chemical transport hoses having Cross-linked Polyethylene (XLPE) or Ultra High Molecular Weight Polyethylene (UHMW) tubes.

Specifications

  • Produced to interchange with all product produced to Commercial Item Description A-A-59326D

Features

  • Provides a permanently attached cam and groove fitting when superior coupling retention is required.

Available Options

  • Fittings are also available special order for other sizes or hose OD's. Consult Dixon for pricing and availability.

How it works

  • To make a connection, simply slide the adapter into the coupler and with normal hand pressure, press the cam levers down.
  • Uncoupling is as quick and simple as coupling. Just lift the cam arms and remove the adapter.

Note

  • Special equipment is required for installation, consult Dixon for pricing and availability.

Safety notes

  • Under no circumstances should cam and groove couplings be used for compressed air or steam service!
  • Dixon stems and ferrules are specifically designed to be used together as a coupling system.
  • Due to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with Dixon products
  • Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70°F (21°C) with a standard Buna-N Seal installed. For use at elevated temperature or other unusual operating conditions, consult Dixon.
  • Contact Dixon for swage recommendations
  • WARNING: Cancer and Reproductive Harm- www.P65Warnings.ca.gov

×
×

Related Products

×
×
×
×
×

Stock Availability